Shipping Containers: The Difference in Appearance and Condition

Archive for the 'Shipping Containers' Category

Shipping Containers: The Difference in Appearance and Condition

Monday, June 28th, 2021

The good, the bad, the ugly: not all shipping containers are created equal. Some are ugly yet still do the job. Others are in pristine condition but you’ll pay top dollar. From one-trip containers to D grade, there are many levels of containers in terms of their appearance and condition.

New/One Trip

These containers have only been used once in international shipping, and were usually built within the last two years. These containers are in excellent condition. You will pay the most for this type but this is a good investment if you need a top-notch container that will be pulling double duty for you for many years.

Cargo Worthy

Cargo worthy storage containers have been inspected and feature a seaworthy certification. If you are planning to ship goods with your container, you’re best off buying a cargo worthy storage container, which has no differences (at least in terms of condition) than a wind and watertight (WWT) container (more on that below).

But this type has the added benefit of being inspected by maritime surveyors, approved for use shipping goods and products overseas. You will pay a few hundred bucks more for this type than WWT simply because of that approval.

WWT

This is the most functional and economical solution, and is generally the most affordable cargo box out there. WWT stands for Wind and Water Tight. They range in condition and are in abundant supply. They are used, which means they vary in color, may have some surface rust, and may be dented and dinged.

But they are more affordable because they don’t have to undergo inspection by a maritime surveyor. Sometimes, they can be inspected by an experienced shop personnel at your direction and can be repaired to ensure they are indeed wind and water tight.

As-Is

As-is containers are sort of like homes being sold as-is – meaning you buy the home/container as it is right now, with no extra work being done on the part of the seller to spruce it up. You’ll likely be looking at some damage which occurred somewhere along the line in the shipping process, as well as structural problems or a lot of rust.

These containers are past the point of being considered WWT. As such, they are much cheaper to buy than cargo worthy or WWT storage containers, but you do have to contend with the damage. This may not matter to you depending on the intended usage, so you can save yourself quite a bit of money here.

Here at Transocean, we have our own system of “grading” our containers. Here’s a look at what each category means.

A Grade

These boxes are in excellent condition, with minimal, if any, rust, good condition doors and gaskets, no major dents, few patches in the roof, and floors in very good condition. Choose this if aesthetics are important to you or you plan to paint the container.

B Grade

With these, you will notice some rust spots but they are mostly superficial in nature – no more than six inches in diameter. You will get good condition doors and gaskets with little to no rust around seals or hinges. You may have to patch a couple of places in the roof or floor, but overall this is a good value as part of a good quality container. Great if you’re planning to use it for storage.

C Grade

Rust, while still superficial, is definitely noticeable yet not predominant. You could see rust spots greater than six inches in diameter. Doors may still function but you may see rust around gaskets, hinges or at the tops of doors. Multiple patches on the roof and floor are likely, with delamination of the flooring as well.

This is our most common and popular grade of shipping container. They’re kind of ugly, but still provide good structural stability.

D Grade

At this level, rust is structural and predominant. You may have a hard time opening or closing doors, and gaskets may be loosening. Severe rust could be accumulating around the seals, with loose floors and severe delamination. Sides often feature large dents or deflections in D grade containers, which can be 20 years old or older. A bit more ugly than the C grade, D grade containers are great for storing 4-wheelers and lawnmowers.

Not sure which grade or type you want? Just ask us!

Contact Transocean Equipment Management

As leaders in the shipping container industry, we can connect you with the most appropriate type of container for your needs and budget. Feel free to ask for a free quote when you contact us at 910-483-7828.

 

 

 

Popular Shipping Container Modifications to Plan Before You Buy

Wednesday, February 3rd, 2021

Shipping container modifications are changes you make inside or outside a container to fit it to a job. Common upgrades include doors, windows, insulation, vents, lights, shelves, and paint.

A plain steel box works fine for storage. With the right upgrades, it can become an office, a shop, a food stand, or a cool, dry storage room.

Below are the most popular shipping container modifications. You’ll see what each one does and what to plan before anyone cuts steel.

Container modifications Transocean installs

Transocean Equipment Management sells and modifies new and used containers. We serve buyers in North Carolina, South Carolina, Georgia, and Virginia. Our standard options include:

  • Insulation, vents, and HVAC
  • Windows, skylights, and roll-up doors
  • Lighting and electrical
  • Flooring, shelving, and custom paint
  • Lock boxes and smoke detectors

Some upgrades on this page, like plumbing and rooftop decks, need outside trades. Ask us about any item before you order.

Choose the right base container first

The box you start with shapes every upgrade. Pick the size and condition first.

  • New (one-trip) containers have straight walls and clean paint. They are the best base for cuts, welds, and finishes people will see.
  • Used containers cost less and suit storage with light upgrades. Dents and rust add prep work before paint or foam.
  • High cube containers stand 9’6″ tall instead of 8’6″. The extra foot leaves room for ceiling insulation and lights.

Compare new shipping containers with used storage containers.

Still torn? Read whether to buy new or used. For exact sizes, see our container specifications.

Branding

If you use your container for business, you can paint or wrap it with your brand and logo. Add anything from signs to your phone number and hours.

Paint lasts the longest. Vinyl wraps and magnetic signs let you change the message as needed. Branding helps any business that needs to be seen, from real estate to food.

Interior paint

New containers leave the factory with a light gray coating on the inside walls. It guards the steel against rust, but it is not a finished look.

Many people repaint the inside when the unit will be an office, food stand, or restroom. That covers any use where guests, customers, or staff spend time inside.

Pick a paint made for metal. Clean the walls and prime any rusty spots first. For color and décor ideas, see our guide to decorating the interior of your shipping container.

Flooring

Most container floors are about 1.1 inches (28 mm) of marine plywood. Makers treat this wood with bug killer so containers can pass biosecurity rules in countries like Australia.

That is fine for storage. For an office, classroom, or living space, seal the plywood or cover it before you lay a new floor.

You may want a better floor if your unit will be a meeting room, mobile office, or training room. Vinyl plank with a wood look is a popular choice.

A mobile restroom needs a tougher floor. Slip-resistant vinyl is easy to clean. For a portable gym, rubber mats soak up impact and protect the plywood.

Doors and windows

Doors and windows are the cuts buyers ask for most. They change how people and gear get in, and how much light the space gets.

Personnel doors

A personnel door, or man door, lets you walk in without opening the heavy cargo doors. Offices and shops use one every day.

Most are standard 36-inch steel doors set in a welded steel frame. Read more about choosing the right exterior door for your shipping container.

Roll-up doors

Roll-up doors open a wide side or end wall for carts, mowers, ATVs, and pallet jacks. Retail stands and farms use them often. The opening needs heavy steel framing because it removes a large piece of wall.

Windows and skylights

Windows add daylight and fresh air to offices and shops. Each one sits in a steel frame welded into the wall.

Skylights bring in light without using wall space. Seal every roof opening well, since the roof is where containers leak first.

Insulation, ventilation, and HVAC

Steel moves heat fast. A bare container gets hot in a Southern summer.

In cool weather, warm inside air meets cold steel and turns to water. That moisture drips on stored goods and speeds up rust.

Insulation

Closed-cell spray foam is a common choice for containers. The Department of Energy says closed-cell foam has a higher R-value and blocks moisture and air leaks better than open-cell foam. It also costs more.

The DOE adds that foam must sit behind a fire barrier equal to half-inch drywall. Rigid foam panels and batts in stud walls cost less. Learn more in our shipping container insulation guide.

Vents and fans

Most containers have a few small factory vents. Extra louvered vents or roof vents move damp air out. They matter most for hay, feed, tools, and anything that can mold or rust.

See what to know about shipping container vents.

Heating and air conditioning

A wall AC unit or mini-split keeps an office or shop usable all year. The installer cuts and frames the opening, then seals it against weather. A licensed HVAC tech should hook up the unit.

Mobile office upgrades

If your container will be an office, add the items that make work easier. Think laminate countertops, chairs, whiteboards, file cabinets, and shelves. A shipping container partition can split one unit into an office and a storage room.

For floor plans, browse our sample layouts for your mobile office. For a step-by-step build, read how to transform a container into an office.

Plumbing

If you run a food business out of your container, or need a bathroom or break room, you can add plumbing. Options include a sink, fridge, stove, and counter space for small appliances.

Plumbing needs holes through the floor or walls, a drain plan, and a licensed plumber. Your county may require a permit and an inspection.

Lighting

For spaces that need more light, add anything from recessed lights to pendant lights. LED lights over personnel doors help at night. For security, motion sensors turn lights on when someone walks up.

Wiring for lights and outlets should be done by a licensed electrician to local code.

Rooftop decks

Why not make good use of the space above the container? A rooftop deck gives you a spot to watch over a work site or host guests.

Plan it with care. Container roofs are thin steel. They are not built to hold a deck, people, and furniture on their own.

A rooftop deck needs its own frame that carries weight down to the corner posts. Have an engineer approve the design.

Locks

If your container will hold things of value, get locks that go beyond the standard ones. Choices range from cargo door locks to security swing arms to lock boxes.

A lock box shields your padlock from bolt cutters. Compare options in our guide to shipping container locks.

Miscellaneous modifications

There is no shortage of other upgrades. More popular options include:

  • Windows
  • Roll-up doors
  • Skylights
  • Heat and AC units
  • Security bars
  • Vents and fans
  • Framing and insulation
  • Electrical
  • Partitions
  • Solar panels
  • Shelving

How modifications affect container strength

A container gets its strength from its frame. Corner posts, top and bottom rails, and corner castings carry the load. The ribbed walls stiffen the box.

Every cut takes away some of that steel.

  • Frame every opening. A good fabricator welds a steel frame around each door, window, or vent cut.
  • Leave the frame alone. The 2021 International Building Code bans cutting or notching rails, corner castings, and posts for single containers using its simplified design path (IBC Section 3115).
  • Plan for ground use. Large cuts reduce how much weight the container can carry on top. A heavily modified unit stays on the ground.
  • Check the steel first. Look for rust at the base rails and door frame before you pay for upgrades.

Learn what affects the structural integrity of a shipping container. Then see how to keep your storage container from rusting.

Permits and building codes for modified containers

Rules depend on how you use the container. Storage units face fewer rules than offices, shops, or homes.

The 2021 International Building Code added Section 3115 for containers used as buildings. It asks for the box’s data and a review of its strength.

South Carolina’s 2021 building code includes this section and took effect on January 1, 2023.

Keep the safety approval (CSC) plate on the door. Code officials may ask for its data.

Call your county building office before you order. Check zoning and HOA rules too. Georgia buyers can start with are container homes legal in Georgia.

What affects the cost of container modifications

Prices vary a lot from job to job. These factors drive most of the cost:

  • Number and size of cuts. A roll-up door costs more than a vent because it needs more steel framing.
  • Container size and condition. A 40-foot unit takes more insulation and paint than a 20-foot unit. Rust repair adds labor.
  • Insulation type. Spray foam costs more than panels or batts.
  • Outside trades. Wiring, plumbing, and HVAC add licensed labor and permits.
  • Finish level. A storage upgrade costs far less than a finished office.
  • Delivery distance. See how shipping container delivery works.

Ask for a line-item quote. It lets you add or drop upgrades to fit your budget.

Benefits of shipping container modifications

Upgrades let you build the exact space you need for work, home, or play. A modified container is:

  • Customizable to your use
  • Often cheaper and faster than a site-built shed or office
  • A reuse of an existing steel structure
  • Safe and durable
  • Weather and rodent resistant when doors and seals are in good shape
  • Convenient to place on your site
  • Personalized
  • Comfortable once insulated and ventilated

A shipping container is mobile, so it works well for short-term uses. When the job ends, you can move it to a new site.

Make your container your own with a few simple or complex changes that fit your needs and budget.

The many uses of shipping containers

People modify containers for all kinds of reasons. You can convert one for almost any use, such as:

  • Ticket booth
  • Security booth
  • Hydroponic container farm
  • Garage
  • Tiny home
  • Sports equipment locker
  • Pop-up café
  • Pool
  • Shed
  • Theater
  • Bistro
  • Field hospital
  • Studio
  • Sauna
  • Art gallery
  • Disaster shelter
  • Student housing
  • Camper
  • Playhouse
  • Lab
  • Backyard pool house
  • Guest house
  • Indoor garden

Shipping container modification FAQs

How much does it cost to modify a shipping container?

It depends on the number of cuts, the insulation type, and whether you need wiring, plumbing, or HVAC. A lock box costs far less than a full office build. Ask for a line-item free quote to price your exact project.

Do modifications weaken a shipping container?

Yes, every cut removes some steel. Openings framed with welded steel keep the container sound for ground use. Never cut the corner posts or rails.

Can you modify a used shipping container?

Yes. Pick one with straight walls, a solid floor, and little rust at the base. Our container condition guide explains each grade.

How can you make a shipping container look better?

Start with fresh exterior paint in your brand colors. Add windows, a personnel door, and exterior lighting. Wood or composite trim and planters soften the steel look.

Do I need a permit to modify a shipping container?

Storage use often needs fewer approvals than an office or home. Occupied spaces may need a building permit under your state’s code. Check with your county before you order.

Contact Transocean Equipment Management

Want to learn more about the upgrades we offer? Contact us for a free price quote at (910) 483-7828. We will walk you through the choices for your new or used shipping container.

Get a Quote
910-483-7828